Dodge Journey CV Axle Replacement Cost Guide 2026
The typical cost to replace a CV axle on a Dodge Journey depends on parts quality, labor rates, and whether one or both sides are done. Key drivers include axle type (driver vs passenger side), door-to-door replacement time, and regional labor rates. Cost and price estimates are provided to help buyers budget and compare quotes.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Per-Axle Parts | $150 | $350 | $600 | New axle assembly, seals, joints; OEM or aftermarket |
| Per-Axle Labor | $150 | $250 | $450 | 1.5–3.0 hours at $100–$150/hr |
| Per-Axle Total | $300 | $600 | $1,050 | Parts + labor; typical range |
| Both Axles (Finishes) | $600 | $1,100 | $1,900 | Two-sided replacement; assume same market conditions |
| Smart-Quote Cushion | $0 | $0 | $0 | Contingency buffer for unforeseen wear |
Assumptions: region, parts quality, typical labor hours.
Overview Of Costs
Cost ranges for a single CV axle replacement on a Dodge Journey typically run from about $435 to $900, depending on whether the job is done on one side or both. A professional shop may bill closer to the middle of that spectrum when confirming axle type and whether any hub or bearing work is needed. The main cost drivers are parts quality (OEM vs aftermarket), labor rate, and the number of axles replaced at once. Labor hours and hourly rates determine the bulk of the variation.
Cost Breakdown
Typical cost composition follows a straightforward split: parts plus labor plus potential extras. The table below uses a standard frame of reference for a single-axle replacement, with totals shown alongside per-unit pricing to aid budgeting.
| Components | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $150 | $350 | $600 | Axle assembly, seals, boots |
| Labor | $150 | $250 | $450 | 1.5–3 hours at $100–$150/hr |
| Labor Time | 1.0–2.0 h | 1.5–2.5 h | 2.5–3.0 h | Shop variance |
| Permits / Diagnostics | $0 | $20 | $50 | Not always required |
| Delivery / Disposal | $0 | $15 | $40 | Ship-to-shop materials or disposal fees |
| Warranty | $0 | $25 | $60 | Shop-provided coverage |
| Taxes | $0 | $25 | $60 | Dependent on state |
| Total (Per Axle) | $300 | $600 | $1,050 | Sum of components |
Formula note: data-formula=labor_hours × hourly_rate> helps illustrate how labor time and rate shape totals.
Factors That Affect Price
Pricing is driven by regional labor rates, axle type, and vehicle condition. Higher labor rates in urban markets can push totals higher, while rural shops may offer lower hourly wages but longer turnaround. A longer run to parts supply or off-brand parts can also alter the final price. Two niche drivers to watch: axle type (driven vs non-driven) and the need for additional wheel bearing or hub work if mounting surfaces show wear. Expect a wider range when OEM parts are specified.
Ways To Save
Shop around for price quotes and consider alternatives to OEM parts when appropriate. Request itemized estimates to compare parts quality, scope, and disposal costs. If a vehicle has high mileages or other suspension wear, some shops offer bundled pricing for multiple axle or suspension components. Budget-conscious buyers can sometimes save by selecting aftermarket axles with solid warranties. Ask for a price match or bulk discount if planning a two-axle replacement.
Regional Price Differences
Prices vary by region, with notable deltas between urban, suburban, and rural markets. In the Northeast, higher labor rates can push per-axle totals toward the upper end of the range, while the Midwest may sit closer to the average. The South often features mid-range quotes, whereas Rural markets can be more variable. Expect roughly ±15–30% differences across regions depending on shop class and part availability.
Labor & Installation Time
Labor time heavily influences the final price. A standard CV axle replacement typically takes 1.5–2.5 hours per axle in a light-duty scenario, but older vehicles with corroded fasteners or seized hubs can require more time. Some shops bill a fixed diagnostic fee if no additional work is approved. Estimate per-hour rate and service hours to compute your total.
Additional & Hidden Costs
Be aware of extras that can appear on the bill. Wheel alignment, tie-rod ends, or control arm bushings may be recommended after an axle change, adding to the total. Some shops include a disposal or environmental fee, and others charge for hazardous waste handling. Clarify if any “shop supplies” or environmental fees apply.
Real-World Pricing Examples
Three scenario cards illustrate typical, mid-range, and premium outcomes.
Assumptions: Journey with standard suspension, one axle replaced, mid-range parts and labor.
- Basic – One axle, aftermarket parts, standard labor, no extras. Specs: 1.5 hours, $95/hr. Parts $120. Labor $143. Total $263.
- Mid-Range – One axle, mid-range parts, standard diagnostics, possible hub check. Specs: 2 hours, $110/hr. Parts $260. Labor $220. Total $480.
- Premium – Both axles, OEM parts, wheel alignment, bearings checked. Specs: 3.5 hours total, $125/hr. Parts $520 per axle. Labor $438. Total $1,940.