Firestone Tire Change Cost Guide 2026

Prices for mounting and balancing Firestone tires vary by shop, location, and vehicle type. The main cost drivers include tire size, service level (mount and balance, valve stems, TPMS reprogramming), and any additional work like wheel disposal or alignment. This guide provides practical price ranges in USD and noted assumptions to help buyers estimate a typical project.

Item	Low	Average	High	Notes
Mounting & Balancing (per tire)	$15	$25	$50	Standard passenger tires; higher for run-flat or performance tires
Valve Stem Replacement (per tire)	$2	$3	$8	Likely included in some packages
TPMS Reprogramming (per vehicle)	$25	$60	$100	Required for sensors; some shops include in service
Disposal Fees (per tire)	$2	$3	$6	Often bundled into total
Tire Disposal for Set of 4	$8	$12	$20	Depends on local rules
Wheel Cleaning/Prep	$5	$10	$25	Varies by wheel type
Alignment (optional)	$89	$120	$200	Not required with all tire changes
Taxes & Fees	$0	$5	$25	Location dependent

Overview Of Costs

Cost for a standard Firestone tire change typically includes mounting, balancing, and basic valve work. For a full set of four tires, expect a bracketed range of roughly $100–$250 before tax and possible discounts. Assumptions: passenger tires, standard alloy wheels, no TPMS complications, no wheel repair or cosmetic work.

Cost Breakdown

Category	Low	Average	High	Notes
Materials	$40	$100	$200	Tires cost separate; this is mounting/balancing related
Labor	$60	$120	$320	Hours vary by vehicle, complexity, and location
Equipment	$10	$20	$40	Shop amortization and tools
Permits	$0	$0	$0	Typically not required for standard tire changes
Disposal	$8	$12	$20	Per set of tires
Tax	$0	$5	$25	Regional variation

What Drives Price

Vehicle type and tire size strongly influence mounting and balancing complexity. Larger or run-flat tires often incur higher per-tire prices due to heavier weight and special balancing needs. TPMS work adds another layer, as modern vehicles require sensor reprogramming when sensors are replaced or remnant codes exist.

Pricing Variables

Regional price differences can swing the total by a noticeable margin. Assumptions: region, tire type, shop policy In addition, seasonal demand and local competition affect hourly rates. A basic mount and balance can be cheaper in rural markets than in major urban centers.

Regional Price Differences

Three common U.S. examples illustrate typical delta ranges:

• Urban Northeast: +5% to +15% relative to national average due to labor costs
• Suburban Midwest: near the national average, sometimes slightly below
• Rural South: often 10%–20% below metro pricing in some cases

Tip: Always ask for a written estimate breaking out per-tire charges and any shop supplies. This helps compare apples to apples across local providers.

Labor, Hours & Rates

Typical labor rates range from $60–$120 per hour, with 0.5–1 hour per tire for mounting and balancing on standard setups. data-formula=”labor_hours × hourly_rate”> For four tires, the labor portion often falls in the $120–$420 band depending on wheels, TPMS, and vehicle access. Specialty tires or wheels may push costs higher.

Extra & Hidden Costs

Hidden or optional costs to watch for include wheel cleaning, valve stems upgrades to be TPMS compatible, and a possible alignment if suspension changes were made or if steering feels off after install. Some shops charge a separate disposal or environmental fee, typically $4–$15 per tire. Request a full breakdown before service.

Real-World Pricing Examples

Three scenario cards show practical totals with different specs. All assume Firestone tires mounted and balanced with standard wheels and no prior tire changes in the last year.

Assumptions: region, specs, labor hours.