Infiniti FX35 Radiator Replacement Cost 2026
Radiator replacement for the Infiniti FX35 is a mid-to-high cost repair, driven by parts pricing, labor hours, and the vehicle’s cooling system design. The figure commonly reflects a full radiator replacement plus related cooling components. This article provides practical cost ranges in USD and explains what influences the final price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Radiator replacement (parts) | $180 | $350 | $750 | OEM or aftermarket varies |
| Labor (shop rates 1.0–2.5 hours) | $120 | $260 | $520 | Regional hourly rates apply |
| Coolant & miscellaneous supplies | $20 | $40 | $80 | Includes coolant and fittings |
| Shop supplies & disposal | $10 | $25 | $50 | Fluids, waste handling |
| Taxes & fees | $0 | $20 | $60 | Local tax impact varies |
| Estimated total | $330 | $695 | $1,460 | Assumes no additional repairs |
Overview Of Costs
Cost ranges reflect parts quality and labor intensity for an FX35 radiator replacement. Typical projects span a broad range because cooling-system components vary by model year and whether additional parts (like a radiator upper/lower hose, thermostat, or cooling fan) are included. Assumptions: OEM or aftermarket radiator, standard vehicle access, and no pre-existing damage beyond the radiator core. Assumptions: region, specs, labor hours.
Cost Breakdown
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $180 | $350 | $750 | Radiator unit, hoses, clamps |
| Labor | $120 | $260 | $520 | 1.0–2.5 hours at US shop rates |
| Equipment | $20 | $40 | $80 | Tools, coolant recovery, scanner checks |
| Permits | $0 | $0 | $0 | Generally none required |
| Delivery/Disposal | $10 | $25 | $50 | Chemical disposal fees |
| Warranty | $0 | $0 | $0 | Most shops include warranty in labor or parts |
| Contingency | $0 | $0 | $60 | Contingency for unseen cooling-system wear |
| Taxes | $0 | $20 | $60 | Depends on locality |
Factors That Affect Price
Part quality and vehicle year are major price drivers, with OEM radiators often priced higher than aftermarket equivalents. SEER-like considerations do not apply here, but reliable vendors may add a premium for exact-fit radiators. The FX35’s cooling system layout can impact labor time; tighter engine bays or older vehicles with corroded components increase hours and potential parts substitutions. Labor hours × hourly_rate is a common formula used by shops to estimate final cost.
Regional Price Differences
Prices vary by region and market conditions, with larger metro areas typically higher due to labor demand and overhead. In the Northeast, expect slightly higher high-range estimates; the South may run a bit below national averages; rural markets often show lower labor charges but may incur higher part-delivery costs. The table below illustrates approximate deltas:
- Coast/Urban: +5% to +15% vs national average
- South/Suburban: -5% to 0% vs national average
- Rural: -10% to +5% depending on supplier access
Labor, Hours & Rates
Labor hours are the biggest swing factor for a radiator replacement. A straightforward swap may take about 1.0–2.0 hours in a well-equipped shop, but if the cooling fan, reservoir, or auxiliary components require removal, hours can extend to 3.0–4.0. For planning, use a base rate of about $100–$180 per hour in many markets, with higher rates in major urban centers. data-formula=”labor_hours × hourly_rate”>
Additional & Hidden Costs
Hidden or optional costs can affect final pricing beyond the core parts and labor. Some common extras include radiator inlet/outlet fittings that are seized, a thermostat replacement, a cooling-system pressure test, or a coolant flush. If the vehicle has engine damage or radiator mounting hardware that is corroded, expect higher costs for metal work or a component replacement. Assumptions: region, specs, labor hours.
Real-World Pricing Examples
Sample scenarios help visualize outcomes for an FX35 radiator replacement. Three cards show Basic, Mid-Range, and Premium configurations with distinct parts lists and labor needs.
Basic Scenario
Spec: aftermarket radiator, standard hoses, no additional cooling parts. Labor: 1.0–1.5 hours. Total: $330–$520. Per-unit: $180–$350 for the radiator, plus $100–$170 for labor. Assumptions: region, specs, labor hours.
Mid-Range Scenario
Spec: OEM-like aftermarket radiator, new hoses, thermostat included. Labor: 1.5–2.5 hours. Total: $520–$860. Per-unit: $250–$450 for radiator, $40–$70 for coolant and disposal. Assumptions: region, specs, labor hours.
Premium Scenario
Spec: official Nissan/Infiniti radiator with all cooling-system refresh, upgraded clamps, cooling fan service. Labor: 2.5–4.0 hours. Total: $900–$1,460. Per-unit: $400–$750 radiator, $50–$100 for extras, $100–$180 for labor. Assumptions: region, specs, labor hours.