Jeep Compass Radiator Replacement Cost 2026
Prices to replace a radiator on a Jeep Compass typically cover parts, labor, and fluids, with major cost drivers including radiator price, vehicle access, and regional labor rates. This guide provides cost estimates in USD with low, average, and high ranges to help buyers budget accurately.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Radiator (OEM vs Aftermarket) | $120 | $230 | $450 | OEM tends to be higher. |
| Coolant & Hoses | $20 | $40 | $100 | Typically includes 1–2 quarts coolant. |
| Thermostat & Clamps | $15 | $30 | $60 | Often replaced with radiator. |
| Labor | $300 | $520 | $900 | Depending on shop rate and access. |
| Fluids Disposal & Tax | $20 | $40 | $80 | Includes coolant disposal and shop tax where applicable. |
| Estimated Total | $475 | $860 | $1,590 | Assumes typical replacement on a Compass with moderate access. |
Overview Of Costs
Radiator replacement on a Jeep Compass involves parts, labor, and fluids. Average total costs typically range from around $860 to $1,000 for common models in the U.S., with lows near $560 and highs near $1,600 depending on parts and labor conditions. Assumptions include a standard V6 or inline-4 engine, no unusual engine access issues, and a mid-range labor rate.
Cost Breakdown
Each cost component impacts the final bill differently. A table below outlines typical contributions and how they vary by spec and market.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $120 | $230 | $450 | Radiator plus hoses, clamps, and thermostat. |
| Labor | $300 | $520 | $900 | Hours depend on access and shop rate. |
| Fluids & Disposal | $20 | $40 | $80 | Coolant and disposal fees. |
| Taxes & Misc | $20 | $40 | $60 | Tax and small shop charges. |
| Total | $475 | $860 | $1,590 | Includes all above items. |
Pricing Variables
Several factors drive price beyond the base parts and labor. Key variables include radiator type (OEM vs aftermarket), engine type, access to the radiator (front grille removal), regional labor rates, and whether ancillary parts (thermostat, hoses, clamps) are replaced at the same time. data-formula=”labor_hours × hourly_rate”> In markets with higher hourly rates, plan for the upper end of the range.
Ways To Save
Some cost-saving steps are common sense and can reduce total outlay. Consider using aftermarket parts with manufacturer-compatible fit, request a bundled labor estimate, and combine radiator replacement with routine maintenance to minimize repeat visits.
Regional Price Differences
Prices vary by region due to labor markets and supply. In the Northeast, expect higher labor rates than the Midwest or South. The West often features elevated parts costs due to distribution, while rural areas may have lower shop rates but longer drive-in times for technicians. A typical delta is ±10%–25% between Urban, Suburban, and Rural settings.
Labor, Hours & Rates
Labor time is a primary driver of cost. Typical installation takes 2.5–4.0 hours on a Compass, depending on grille access, cooling system complexity, and whether the vehicle has additional under-hood components that must be removed. Local hourly rates commonly range from $90 to $120.
Additional & Hidden Costs
Hidden or incidental costs can appear. Expect potential charges for coolant recycling, environmental fees, core charges on certain radiators, or shop supplies. If sensors or auxiliary components (fans, wiring harnesses) are damaged during removal, replacements can add to the bill.
Real-World Pricing Examples
Three scenario cards illustrate typical quotes.
Basic: OEM radiator, standard hoses, limited labor scope. Specs: 2.5–3.5 hours, engine: 2.4L I4. Total: $560–$700. Parts: $180–$320; Labor: $350–$520.
Mid-Range: Aftermarket radiator with approved fit, minor extra parts. Specs: 3–4 hours. Total: $800–$1,000. Parts: $250–$420; Labor: $480–$720.
Premium: OEM radiator with full cooling system refresh (thermostat, hoses, coolant, new clamps). Specs: 3.5–5 hours. Total: $1,100–$1,590. Parts: $410–$550; Labor: $700–$1,000.
Assumptions: region, specs, labor hours.