Mavis Tire Plug Cost and Pricing Guide 2026
The typical cost to plug a tire at a Mavis location ranges from a low to a high depending on service scope and region. This guide outlines the price areas and explains what affects the cost, including labor time and additional services. The focus is on providing practical pricing in USD to help budgeting and comparisons.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Tire plug service (plug only) | $8 | $15 | $25 | DIY plug kits are cheaper; professional plug adds labor. |
| Tire plug with patch | $20 | $30 | $45 | Recommended for punctures on the tread. |
| Valve stem replacement | $10 | $15 | $25 | Often paired with plugging. |
| Labor for plug and patch | $12 | $25 | $40 | Includes tire removal and reinstallation. |
| Tire rotation (when done during service) | $15 | $20 | $30 | Optional with plug job. |
| Tax | Varies | Varies | Varies | Depends on location and total bill. |
Assumptions: region, tire size, puncture location, and whether patching is included.
Overview Of Costs
Typical cost range for Mavis tire plug services spans roughly $8 to $60 depending on scope. The core drivers are whether the service is a plug only or includes a patch, valve work, and labor. Regional variance often shifts totals by a few dollars to several tens of dollars. For budgeting, expect a mid range around $20 to $40 for most puncture repairs performed by Mavis technicians.
Pricing for a basic plug often sits near the low end, while combined services and on-site labor can push toward the higher end. Assumptions include normal punctures in the tread area and standard passenger tires.
Cost Breakdown
The cost table below shows how a typical plug job may break down.
| Materials | $0-$6 | Plug material and patches | ||
| Labor | $12-$25 | Time for removal, inspection, plug and possible patch | ||
| Equipment | $0-$5 | Tools and valve stem if replaced | ||
| Permits | None | |||
| Delivery/Disposal | $0-$2 | Waste handling | ||
| Warranty | $0-$8 | Limited warranty on repair | ||
| Overhead | $2-$6 | Shop costs allocated | ||
| Taxes | Varies | State and local tax |
Formula reference: labor hours × hourly_rate
What Drives Price
Core price drivers include puncture type, tire size, and whether a patch is added. Punctures in the tread are cheaper to fix than sidewall damage, which can require replacement. Tire size affects material costs and labor time, with larger or run-flat tires typically costing more to service. Local labor rates and shop policies also influence the final price.
Additional factors that push price up include valve stem replacement when needed and ensuring a proper seal with a patch or plug. The presence of tires already on the vehicle and the need for wheel removal adds to labor hours. Seasonal demand may also affect pricing at certain locations.
Ways To Save
Options to reduce cost include doing a plug only if patching is not required, and combining the service with a rotation or other maintenance. Check if a tire warranty covers punctures or if there are bundled services that reduce the overall price. Visiting a location during slower hours or off-peak days can also yield modest savings in some markets.
Consider comparing nearby shops for a like-for-like quote rather than accepting the first price. If a tire is near the end of its tread life, evaluate whether replacement is a better long-term value than repairs. A DIY plug kit can lower material costs but carries risk if not performed properly.
Regional Price Differences
Prices can vary by region due to labor markets and taxes. In urban areas, the average may lean higher than rural markets, with suburban shops often falling in between. Expect the average price to swing by roughly ±15–25 percent when moving between a large city, a suburban suburb, and a rural town.
Labor & Installation Time
Typical labor for a plug and patch job ranges from 0.5 to 1.5 hours, depending on tire size and wheel access. Time is longer if the tire requires replacement of a valve stem or if wheel removal is necessary for interior inspection. Complex tires or run-flats can extend labor by 30 minutes to an hour.
Real-World Pricing Examples
Basic scenario: A standard passenger tire, plug only, no patch, no valve work. Specs: 205/55R16, tread puncture, wheel easily accessible. Hours: 0.5. Total: $8–$15; per-unit: $6–$12.
Mid-Range scenario: Plug plus patch, valve stem not replaced. Specs: 225/60R17, moderate damage, on-car service. Hours: 1.0. Total: $25–$40; per-unit: $18–$28.
Premium scenario: Patch, valve stem replacement, and tire rotation offered during service. Specs: 265/65R18, tread repair needed, wheel removal required. Hours: 1.5. Total: $45–$60; per-unit: $28–$40.
Assumptions: region, vehicle type, puncture distance from center, and warranty eligibility.