Nissan Altima Engine Mount Replacement Cost 2026
Purchasers typically pay a combination of parts and labor to replace engine mounts on a Nissan Altima. The main cost drivers are the number of mounts replaced, labor time, and the choice between aftermarket and OEM parts. This guide provides precise cost ranges in USD with per-unit and total estimates.
Assumptions: region, specs, labor hours.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Parts (each mount) | $40 | $120 | $300 | OEM parts are at the high end; aftermarket options cheaper. |
| Labor (hours) | 2 | 3.5 | 6 | Represents 1-2 mounts; higher if access is restricted. |
| Total (all mounts, installed) | $350 | $700 | $1,400 | Assumes 1–3 mounts; ranges reflect variability in labor and parts. |
| Additional items | $20 | $75 | $160 | Fluids, hardware, or alignment if needed. |
Overview Of Costs
Typical price range for Nissan Altima engine mount replacement is $350–$1,400, depending on the number of mounts replaced and the part quality. The per-mount range tends to be $40–$300 for parts and 2–6 hours of labor across the job. In most cases, owners replace two mounts to restore engine stability, which places the middle of the range around $600–$1,100 if labor costs are moderate.
Price At A Glance
The bill often breaks down into parts plus labor, with potential add-ons such as fluids, alignment, and disposal fees. A basic job with aftermarket parts and standard access will be on the lower end, while OEM parts and complex access push toward the higher end. What you pay is driven by parts choice, labor time, and regional labor rates.
Cost Breakdown
| Costs | Low | Average | High | What influences the cost |
|---|---|---|---|---|
| Materials | $40 | $120 | $300 | OEM vs aftermarket; number of mounts replaced. |
| Labor | $150 | $350 | $900 | Hours required; access difficulty; shop rate. |
| Permits/Inspections | $0 | $0 | $0 | Generally not required for this repair. |
| Delivery/Disposal | $5 | $20 | $40 | Fees vary by shop and region. |
| Alignment/Diagnostics | $0 | $50 | $150 | Recommended if steering feel changes after replacement. |
| Warranty | $0 | $0 | $0 | Some shops include limited coverage with OEM parts. |
What Drives Price
Several factors influence final pricing for Altima engine mount work. Mount count and type—the replacement may involve 1–3 mounts, with engine, transmission, or intercooler mounts varying in complexity. Access and labor rates—vehicles with tight engine bays or degraded mounting points increase labor time.
Regional Price Differences
Prices vary across the U.S. due to labor markets and supply chains. In urban markets, expect higher rates; suburban markets hover around the average; rural shops can be lower but may add travel fees or limited availability. Examples show a typical ±15–25% delta between regions.
Labor, Hours & Rates
Labor charges commonly appear as hourly rates. Typical shop rates range from $70–$140 per hour nationwide, with advanced or dealer shops on the higher end. If two mounts require removal, estimate 4–7 hours total depending on access. Labor efficiency and shopLoad factor can swing totals by hundreds of dollars.
Additional & Hidden Costs
Hidden costs may include new hardware, fluids, or inspection fees. Some shops bill for alignment adjustments even when not required; others include a light wheel alignment in the service. Always confirm whether fluids are included in the quote.
Real-World Pricing Examples
Three scenario cards illustrate typical outcomes for common ALtima setups.
- Basic: 1 motor mount, aftermarket part, standard access. Parts $40, Labor 2.5 hours at $90/hr, Total ~$325.
- Mid-Range: 2 mounts, aftermarket parts, standard access, fluids included. Parts $160, Labor 4 hours at $100/hr, Alignment $60, Total ~$540.
- Premium: 2 mounts, OEM parts, challenging access, possible transmission crossmember work. Parts $350, Labor 6 hours at $120/hr, Fluids $30, Alignment $100, Total ~$1,420.
Assumptions: region, specs, labor hours.
Regional Price Differences
Prices for Altima engine mount replacement vary by region. Coast-to-coast differences reflect labor markets and parts availability. In the Northeast, a premium may appear on OEM parts; the Midwest often has balanced pricing; the South may offer lower labor rates but variable parts costs.
Real-World Pricing Examples
Three scenario cards offer concrete quotes with assumptions and outcomes. Basic, Mid-Range, and Premium cases cover common configurations, helping buyers compare nearby shops and scope the job accurately.
Ways To Save
To reduce total costs, consider these approaches. Ask for a parts option mix (OEM vs aftermarket) and request a clear, itemized estimate. If multiple mounts are needed, negotiating a bundled price can lower the per-mount rate. Consider bringing your own fluids or requesting a reduced-rate diagnostic if not included in the quote.