Nissan Versa Wheel Bearing Replacement Cost: Price Guide 2026
Owners commonly ask about the cost to replace a Nissan Versa wheel bearing. This guide presents typical price ranges, what drives the price, and real-world quotes to help budget accurately. The main cost drivers are part price, labor time, and regional labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Wheel bearing replacement (per axle, parts + labor) | $320 | $520 | $780 | Includes hub assembly and standard labor; price varies by hub type (OEM vs aftermarket). |
| Parts only (hub assembly) | $100 | $180 | $260 | OEM hub tends to be higher than aftermarket. |
| Labor (professional shop) | $110 | $190 | $290 | Assumes typical 1.5–2.5 hours; may vary by location. |
| Taxes & fees | $15 | $40 | $60 | Depends on state and municipality. |
| Extras (alignment, wheel stud, rotor) | $0 | $60 | $180 | Optional services may be recommended. |
Assumptions: region, specs, labor hours.
Overview Of Costs
Typical cost ranges for a Nissan Versa wheel bearing replacement are presented per axle. Low represents a conservative estimate with aftermarket parts and minimal add-ons; High reflects OEM parts and potential extra services. The total project price will depend on hub type (OEM vs aftermarket), local labor rates, and whether both sides are done in a single service window. For a single axle, expect the price range shown below; for both axles, double the ranges as a rough midpoint.
data-formula=”labor_hours × hourly_rate”>
Cost Breakdown
| Component | Low | Avg | High | Notes |
|---|---|---|---|---|
| Materials | $100 | $180 | $260 | Hub assembly; OEM typically higher than aftermarket. |
| Labor | $110 | $190 | $290 | Measured in hours; Versa swings around 1.5–2.5 hours depending on access and kit. |
| Equipment | $5 | $15 | $30 | Specialized tools or lifts may add a small spread. |
| Taxes | $5 | $20 | $40 | State and local tax variation. |
| Warranty | $0 | $20 | $50 | Limited coverage varies by shop and part type. |
| Contingency | $0 | $20 | $50 | Minor extra labor if hub removal is difficult. |
What Drives Price
Part choice is a primary driver: OEM hubs cost more than aftermarket equivalents but may provide longer warranty or compatibility assurances. Labor time depends on hub accessibility, brake components condition, and vehicle trim level. A sealed versus non-sealed bearing design can affect replacement ease and time.
Factors That Affect Price
Regional labor rates vary across the U.S.; urban shops generally charge more than rural shops. Number of axles to service in the same visit reduces per-axle labor cost. Other drivers include the need for front-end work (alignment) and any related components such as wheel studs or rotors.
Ways To Save
Shop around for parts and compare OEM versus aftermarket hubs. Ask for a bundled quote if both sides are needed, as many shops offer a small discount when performing two replacements in one visit. Consider an independent shop with good reviews for lower hourly rates.
Regional Price Differences
Prices differ by market. In the Northeast, labor rates often run higher than the South, while the Midwest may be mid-range. A comparable job might be up to ±15% higher in a major metro area compared with a suburban market, and ±25% higher in a high-cost coastal city. Regional differences affect both parts and labor costs.
Labor & Installation Time
Typical installation consumes about 1.5–2.5 hours per axle on a Versa, depending on access and tool availability. Labor rates commonly range from $90 to $140 per hour in many U.S. shops. For a two-axle job, expect a 2–4 hour window and adjusted pricing.
Real-World Pricing Examples
Basic scenario: aftermarket hub, standard labor, no extra services. Specs: front-wheel drive Versa, 1 axle, 1.5–2 hours. Total: $320-$420 with parts around $100–$180 and labor $110–$190. Assumptions: mid-range region, no add-ons.
Mid-Range scenario: OEM or premium aftermarket hub, alignment not included. Specs: 1 axle, 2 hours. Total: $430-$560. Parts $150–$210, labor $180–$240. Assumptions: suburban market, standard brake components.
Premium scenario: OEM hub with rotor inspection and wheel stud check. Specs: 1 axle, 2.5 hours. Total: $560-$780. Parts $180–$260, labor $250–$290, inspection added Assumptions: urban market, warranty extension.
Maintenance & Ownership Costs
Five-year cost outlook for wheel bearings involves potential repeat failures if contamination or improper installation occurs. Routine inspections at every brake service can catch wear early, potentially lowering unexpected replacement costs. Consider rotating tires regularly to minimize uneven loading that can stress bearings.