Right Rear Wheel Bearing Replacement Cost 2026
Buyers typically pay a few hundred dollars to replace a single wheel bearing, with the price driven by vehicle type, labor hours, and parts quality. The cost is affected by the axle design, the need for hub assemblies, and whether additional components like seals or ABS parts must be replaced. This guide provides cost ranges in USD and practical pricing factors.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Right rear wheel bearing replacement | $320 | $590 | $1,050 | Includes bearing or hub assembly, labor, and basic hardware |
| Plus brake work (if needed) | $90 | $200 | $450 | Pads/rotors or caliper service may be required |
| Vehicle complexity modifier | $0 | $120 | $350 | SUVs/HD models cost more |
| Taxes and fees | $0 | $40 | $100 | Local sales tax varies by state |
Overview Of Costs
Typical cost range for replacing a single right rear wheel bearing spans from about $320 to $1,050, depending on the vehicle and parts chosen. A basic replacement using standard bearings on a common sedan typically lands in the $320–$650 range. High-end or AWD vehicles may push total costs toward the $800–$1,050 area when hub assemblies or special sensors are involved.
Per-unit considerations include a bearing or hub assembly priced at roughly $150–$420, with labor commonly $170–$500 for the job. For vehicles requiring additional components like seals or ABS tone rings, the price may rise to the higher end of the range.
Cost Breakdown
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $120 | $250 | $420 | Bearing or hub assembly, seals |
| Labor | $170 | $320 | $520 | Time to remove axle, press bearing, reinstall |
| Equipment | $20 | $60 | $110 | Press tools, jacks, stands |
| Permits | $0 | $0 | $0 | Not typically required for passenger cars |
| Delivery/Disposal | $0 | $10 | $40 | Old part disposal |
| Warranty | $0 | $20 | $60 | Limited or extended options |
| Contingency | $10 | $30 | $100 | Unexpected fastener or sensor needs |
What Drives Price
Labor hours and crew rates are a major factor; many shops bill 1.5–3.5 hours for a standard bearing replacement, with hourly rates ranging from $90 to $160. Vehicles with tighter undercarriage access or dual bearings cost more in labor time.
Parts selection influences price; basic bearings may cost toward the low end, while hub assemblies with integrated sensors or premium brands push costs higher. AWD and newer models often require more expensive components.
Vehicle design and fit affect price; independent rear bearings on older sedans are cheaper than sealed hub assemblies used on some crossover SUVs. The presence of ABS sensors and tone rings adds potential labor and part costs.
Regional Price Differences
Pricing varies by region due to labor markets and taxes. In the Northeast, total costs commonly run 5–12% higher than the national average. The Midwest tends to be near the average, while the Southeast can be 3–8% lower in some markets. SUV and truck servicing in urban areas often carries a premium compared with suburban or rural shops.
Labor & Installation Time
Most right rear bearing jobs take 1.5–3.5 hours on typical passenger cars. Shop rates commonly range from $90 to $160 per hour, with fringe costs for rush service or specialized tools. Assumptions: sedan or light SUV, standard bearing, no additional components.
Additional & Hidden Costs
Hidden charges may appear if brake components require service or if the axle needs alignment post-replacement. Brake system checks are often recommended after bearing work, which can add $50–$200 for inspection and minor pad/rotor work. Environmental or disposal fees may apply in some states.
Real-World Pricing Examples
Basic — Sedan, standard bearing, no extra parts. Specs: 1 bearing, standard install. Labor: 1.8 hours at $110/hr. Parts: $180. Total: $320–$420.
Mid-Range — Small SUV, hub assembly with seal, possible ABS sensor. Specs: hub+bearing, seal, light brake check. Labor: 2.4 hours at $125/hr. Parts: $300. Total: $590–$800.
Premium — AWD crossover, premium hub with sensor, brake work, disposal. Specs: hub+sensor, rotor/pads as needed. Labor: 3.2 hours at $150/hr. Parts: $420. Total: $900–$1,050.
Price By Region
Three regional snapshots show regional variance. In urban coastal markets, total costs can exceed 10% above the national average due to higher labor rates. Rural areas may average 6–12% below the national baseline. Suburban markets typically align with the nationwide mid-range, with local shops sometimes offering lower hourly rates to attract customers.
Budget Tips
Shop around and request itemized quotes to compare parts and labor separately. Ask about hub vs bearing assemblies and whether ABS components are included in the price. Consider timing work to off-peak periods to avoid surge pricing in busy shops.
Check for bundled maintenance offers that include a brake check or rotor resurfacing if needed, which can improve overall value when multiple components approach replacement thresholds. Confirm any warranty terms on both parts and labor before authorizing the repair.