Subaru Crosstrek Wheel Bearing Replacement Cost 2026
The typical cost to replace a wheel bearing on a Subaru Crosstrek depends on parts, labor, and regional pricing. Key cost drivers include front versus rear bearing, hub assembly type, and shop labor rates. This guide provides practical USD pricing ranges and real-world scenarios to help buyers plan a budget.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Total project range | $320 | $760 | $1,500 | Per wheel, front bearing typically higher; regional variation applies |
| Parts (hub/bearing assembly) | $120 | $270 | $450 | Front hubs usually cost more |
| Labor (per wheel) | $200 | $350 | $1,050 | Hour estimates vary with access and vehicle year |
Assumptions: region, specs, labor hours.
Overview Of Costs
Typical cost range for Crosstrek wheel bearing replacement encompasses parts, labor, and miscellaneous fees. Replacement on a Crosstrek often involves either a bearing or an entire hub assembly, with front-wheel bearing upgrades costing more because of complexity. The overall price depends on whether the job involves one wheel or two, the exact hub design, and the local labor market. Parts can vary by supplier and whether a remanufactured or new hub is chosen.
Cost Breakdown
Breaking down the price helps buyers see where money goes, from the parts kit to labor and potential extras.
| Category | Typical Range | Notes |
|---|---|---|
| Materials | $120-$450 | Hub assemblies or bearings; front hubs usually at the higher end |
| Labor | $200-$1,050 | Hours depend on access, axle setup, and whether wheel bearing or hub is replaced |
| Equipment | $20-$60 | Tools, alignment checked if needed |
| Permits | $0-$50 | Typically none unless a major brake or suspension job is required |
| Contingency | $20-$150 | Extras for related brake or ABS sensor concerns |
| Taxes | $20-$100 | State and local taxes apply |
What Drives Price
Several factors uniquely influence Crosstrek bearing replacement costs beyond base pricing. Front bearing replacement tends to be costlier due to access and potential alignment checks. Vehicle year matters because newer models may use different hub assemblies or require additional sensors. A longer run length or a vehicle with aggressive wear can necessitate more labor time or different parts. Regional labor rates and shop markup also play a significant role.
Ways To Save
Practical strategies can reduce the overall bill without sacrificing safety. Compare quotes from multiple shops, ask for OEM vs aftermarket hub options, and see if a hub assembly with included bearings is offered at a bundled price. Some shops provide a discount for replacing both sides at once or for brake jobs bundled with the bearing service. Finally, request a pre- and post-repair inspection to avoid unnecessary additional work.
Regional Price Differences
Prices vary across regions due to labor markets and material costs. In urban areas, expect higher labor rates, while rural shops may price more competitively. Midwest markets often fall between coasts, with the West Coast typically at the high end and the Southeast at the mid-to-low range. The delta between regions can be ±15% to ±35% for a single-wheel replacement, affecting total project cost significantly.
Labor & Installation Time
Labor hours directly impact the bill, particularly when front and rear bearings differ in complexity. Typical labor spans 1.5 to 4 hours per wheel, with front-wheel hub jobs on modern Crosstreks leaning toward 2–3 hours at mid-range shops. High-hour estimates come from additional tasks like ABS sensor checks or wheel alignment if necessary. A mini formula note helps visualize this: data-formula=”labor_hours × hourly_rate”>
Real-World Pricing Examples
Three scenario cards illustrate expected ranges in practical terms.
-
Basic: Front-wheel hub only, aftermarket parts
Specs: 2018 Crosstrek, front hub replacement, no additional repairs
Labor: 2.0 hours; Parts: $150; Rates: $95/hour
Totals: Parts $150 + Labor $190 + Fees $30 = $370 total -
Mid-Range: Front and rear hubs, OEM parts
Specs: 2016 Crosstrek, both sides considered; includes minor brake check
Labor: 3.0 hours; Parts: $320; Rates: $110/hour
Totals: Parts $320 + Labor $330 + Fees $60 = $710 total -
Premium: OEM hubs, two-wheel replacement, wheel alignment
Specs: 2020 Crosstrek, front and rear hubs replaced on one axle, alignment included
Labor: 4.0 hours; Parts: $420; Rates: $130/hour
Totals: Parts $420 + Labor $520 + Alignment $60 = $1,000 total
Assumptions: region, specs, labor hours.